Recent content by Keith Lindquist

The compression was tested before the motor was installed and that was just fine. Upon first starting the sled we wanted to test as much as we could before taking it off the stand thus the reverse check. Another goofy issue is that only the left light was on when the high beams were turned on...

I'm about to pull this sled back into my shop so I can take some pictures if that will help I just really want to get this thing running it's been nothing but a dam battle all the way thank god the guy I bought the motor from is awesome he sent me a whole new wire harness because they don't...

Yes I did and becides a ripple in the washer that sits against the spring everything looked to be fine but I throughly cleaned everything and used a tephlon grease on the cam rollers to make shure they would not stick

I just built a 2012 pro R 800 rush we bought the sled as a roller. I then purchased and installed a 2015 RMK 800 motor that came with it's primary clutch. Upon starting it on the stand becides adjustment of the belt tension (so the Mark's sat just over the top of the secondary) it seemed to run...