Latest activity
-
Rbell14 replied to the thread INDY XC Fox QS3 (Front Ski Preload).Thank you for the suggestion. Dealer confirmed 9.75 inch on front shock preload which differs from the owners manual of 10.8 inces... -
8850Switchback replied to the thread INDY XC Fox QS3 (Front Ski Preload).I'd be willing to bet thats a misprint, the 2 XC models are probably the same and the Adventure is the one with the different spring...
-
Looking for a bit of help. Just purchased a 2024 Indy XC 650 137. Checking factory shock preloads. Owners manual says 10.8 inces from...
-
-
NNothwoods replied to the thread Running problems with 03 XC 800.Well here's my latest theory, fundamentally I think the problem is that the timing is too far retarded, and I read that when you unplug...
-
SSevey replied to the thread Coolant Sensor.Thanks so much. Appreciate the help MS
-
8850Switchback replied to the thread Coolant Sensor.There's a link to the AXYS service manual here... https://polarisstarpower.com/threads/general-tech-faq.226/ They recommend removing...
-
8850Switchback replied to the thread Coolant Sensor.I've never changed one on a 600 but you are probably going to at least have to take that fiber duct part of the airbox that overhangs...
-
-
SSevey replied to the thread Coolant Sensor.Looks like the air box has to get out of the way to get at it? Does that sound about right? MS
-
SSevey replied to the thread Coolant Sensor.So is it the one right beside the thermostat housing with two wires - black and yellow? MS
-
8850Switchback replied to the thread Coolant Sensor.Its the brass one screwed into the side of the head, has a 90deg brass nipple right next to it. The black one bolted in underneath the...
-
NNothwoods replied to the thread Running problems with 03 XC 800.I’ll take a look at that next
-
SAnyone remove a coolant sensor from a `19 XC 600? Looks like its at the back of the engine beside the thermostat housing….. Any insight...
-
8850Switchback replied to the thread Running problems with 03 XC 800.The only other thing I can think of is to check the system voltage with the sled running. If the VR is acting up maybe the TPS is...
-
NNothwoods replied to the thread Running problems with 03 XC 800.I took the flywheel off to look at the stator timing marks, they are lined up perfectly. Everything looks good with the stator, the...
-
NNothwoods replied to the thread Running problems with 03 XC 800.Thanks guys, just an update, I got a used TPS on ebay and adjusted it, didn't make any difference, I had my buddy at the local dealer...
