Recent content by MoreHP

So they have the same heel as polaris 10? If so I’ll have to try them!

How’s the heel of the turbo mag, same as the 10 series?

When I sent mine to Indy Dan he did machine the overdrive but I made sure he cuts it for the axys straight 27 degree. Haven't seen a problem with mine, I never had a pro r but since it has a 24-28 degree you should be able to see it???or maybe lay a straight piece of metal and see if he cut a...

lol, thought you were dynoing at DTR

Original Polaris colors!

Let me know when you guys go. I'll give you a hand if you want, or even taking the sleds of the trailer haha

Epi belly busters installed with 120-310 with glide washer. 3800 engagement and very smooth with no belt.

Just enough color, looks sweet!

Bikeman pipe and tune! Used a little exhaust sealer on the donuts. The spring puller is also a must, makes it a lot easier and no hassle. Epi belly busters tomorrowSmileyFaces7

He must've cut the heel too much then because it was hitting the webbing so he had to use a dremel to sand it down slightly :/

Worst part is waiting :Banghead

So if I don't like them I'll just take them out. Now if I wanted to try the stock 11 I would have to reshim the belt to sheeve clearance

He didn't touch the heel pad, I made sure he didn't. He cut the heel on the weight to match the 10 because the standard 11 has a taller heel. This way I can use 10 series weights or the mod 11's I have now. Just tried the stock 100/275 without the glide washer. Engagement is at 3850

Sorry about that, misunderstood, so stock axys (100/275) spring with glide washer or 110/290 with no glide washer?

Update, talked to John at indy specialty, he has to use a dremel on the webbing because with the cut heel the weight was hitting the webbing.