Search results

let us know your opinion from your ride tomorrow gtwitch in wyoming

All (6) of my Polaris's I torque Primary Bolt to 70 ft-lb and start and run and then retorque to 80 ft-lb seems to be fine, I think the book says 80 ft-lb, I have done it this way for over 15 years on Polaris. gtwitch in wyoming

I am with racerdave, looks like the exhaust valve is scuffing the piston, better fix that or it will occure again. Give Indy Dan a call, he can fix that for you, I have done all of my machines starting with my 07 700 Dragon and 2 sons have 2012 and 2015 800 PRO RMKs and my 11 PRO RMK 800 and...

If the dealer did the pre sale prep , he put extra oil in the fuel tank and the ECU (computer) is programmed to add extra oil for a break in period so I think that oil comming from the Y pipe to exhaust pipe and possibly from the pipe to muffler (can) is normal and as you say (a mess!) but...

Where do we get(buy) one?? gtwitch in Wyoming

I have not tried the KLIM Acrtic but I have 2 of the under aromr clavas that I really like, I may try the Sinister with yellow, as I am going to buy a new helmet and right now there is a very reduced price set of Sinisters with the purchase of the hemet. Need to get it together and just push...

I have the 509 Avaitor goggles and going to buy another pair to go on my soon to be purchased 509 helmet to replace my 8 yr old ($88) HJC that has seen more than one bad incidents and seen better days. Really like the Avaitors need new lens for this season, Ithink yellow this time!. gtwitch...

Check out the rational for Plateau Honeing--- talk with Dan at Indydans, Dan put a short post on SNOWEST last year ( I believe) good read. I have a shop here who will do it also with good results. gtwitch in wyoming

Don't waste time and effort Go buy T-27 from Snap-On and when you break it (and you will) , at least it is free the next time. Hint: heat the head of all the bolts with torch and then put the torx in place and firm tap with ball pein hammer and it should come right out. gtwitch in wyoming

The SLP Stage 3 for the Pro 800 does not have any porting changes, only heads, pipe, can, clutching and Power Commander. Like I said, for the money spent, I think it could be better, but it runs good! gtwitch in wyoming

I have used Amzoil for over 15 years on (first Cat) and after switching to Polaris In 1997, I started using Amzoil and never looked back! I have never had a lube related problem with Amzoil. My 11 Pro 800 163 lost a mag side rod last Feb 28 and after tearing it down, I can blame the rod...

I have a Stage 3 with PC5 on my 11 PRO 800 163 and rode it for 2 1/2 seasons and at 2700 miles, lost the Mag side rod about 2 miles from the parking lot last March as a result of lube loss or too little oil from the factory setting of the oil pump as I discovered in the teardown/rebuild and...

Looks like a good tool to play with, I wonder how it will be at getting the information when there is a failed or malfunctioning part. Most of the time Digital Wrench is only OK in the right hands of a properly trained 'Tech' . The price is reasonable. gtwitch in wyoming

Does anyone have the Skidoo Part number for the thermostat bypass?? Think I will look at doing this mod to our 3 800 Pro 163's for next season riding. gtwitch in wyoming

What is the part number from Polaris or where to get ??? Need something that flows more than the stock on the 800 Pro 163 in spring riding at altitude!! I have already put the head bypass like SLP sells from the head to a tee in the return line from the throttle body to the fill bottle, this...

Rode 2011 Pro 800 163 with SLP stage 3 and Iceage Pro-Motion 1500= miles this winter. Have two sons riding newer Pro's .