Search results

Meter on both (yellows)Z wires, on AC Setting and with a Regulator Adaptor Setting at DC. getting same result

they are yes, all individual wingdings. the most I got was 12VAC (Yellows Z) which give me 6VDC out of VR(RED)

Ya I did check connections specially the yellow to VR, but maybe the other wires from the stator are drowning my yellow power, I may like to disconnect and check again the yellow output to VR after disconnecting everything, we did try a new stator and flywheel, same result. Thak you again for...

I saw that too, doesn't say, only the ohms and output to the red wire off the VR (14.6vdc), What I did today is took the grounds off a cleaned them good. Also did process of elimination and didn't help, so what I also did is unplug the red wire from the whole system and still get 6vdc off of...

Hello, sorry a little late, was at camp. The manual goes to 2017. I have 2 ground on the left above the front shock and another ground on the right below the starter on the frame. Voltage coming out DC out is 6 vdc same as Cap. She will start with no caps still and run pretty good. Would you...

both of mine caps that I have (borrow another one from a blown sled with are rebuilding the motor) do not hold charge at all they drop right away after I take off DC voltage in within 1.5 minutes I have 1.6 volts.

Yes you are right, I downloaded the 2015-17 AXYS, and Im more confused now then ever. hear why. First I ran the vin number to make sure I had a 2016. and yes it is. If you notice the wires going into the VR from the sled (3rd picture), you will notice that the two yellows are on top, the...

I have 2 caps did the same thing. but you can be right, i have one on ordered just in case First, thank you for replying, as you know the cap is tight in to the VR ( Combination AC/DC Regulator - Battery Charge Rectifier) . see attached file which mean that only a few parts can drown it... 1...

I have a 2016 Polaris 600 rmk, I have the same problem, only start with Capacitor Unplugged. Runs great with out Cap but no reversed. What I have done so Far 1. New Stator 2. New VR 3. New Relay (Only one in this sled) 3. New Flywheel ( Why? Just in Case ) 4. Check all stator Ohms, They all...