Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
We have updated the site to the latest version. You will be required to log in to make sure your account is active. There are quite a few new functions so it will take a little time to get use to it. Please post if you see or have any issues.
Bolt came out of the valve and it dropped to the bottom causing a lot of heat to build up and I ended up putting new cylinders and pistons in it. That was 1500 bucks for parts
69 miles away from 10,000
Got a new motor and the bolt came out of the pro side exhaust valve 75 miles away from the truck and it heated up too much which took out the piston and cylinder.
If you can’t get over 7000-7200 don’t push it to hard or she’ll shit the bed
yes it must be engaging less than 3000 rpm. Put a 120/310 primary and a 140/200 or 220 secondary spring with some 68 gram weights. Your do for that with the miles it has on it
Do you have the correct belt and possibly the belt deflection is just a little tight . Back the adjusting bolt on the side of the secondary clutch a 1/2 turn and retighten the locking nut and see if it stops moving on the ground.
Finally got to play with clutching and used cutler turbo mags 60 gram loaded with 2 1" screws and a 140/200 and is a huge improvement but got ahold of some 65 gram tm's and need to tune them in more with the 140/220. Have not gotten to gearing yet but did get 22&41 with a 70 pitch chain to try...
Snow is dropping fast but got 500 miles in last couple weeks what a blast. What other mods help out with the wheelie king? I see other people are tightening front limiter straps to control weight transfer.
Thanks for info where do you recommend ordering these parts at? Would a 22/40 set of gears work or the 22/41 is best. Would the qap2's allow me enough adjustment to use here in mn and also in the mountains?
I just got the assault a couple weeks ago and have put 10 68's with a 120-310 primary spring ,stock gearing and driven clutch components for the 2" track. I'm looking for more info for clutching and gearing. Sled jumps to 8250-8300 on take off and then drops to 8100 after 75mph
I have 2 1996 ultra's one with psi tripple pipes and 300 miles on total engine rebuild. The other has tripple slp pipes but runs bad i think crank needs to be indexed but runs,plus extra parts $1600 obo Also a sled bed 8.5x10 with alluminum cap good shape $1400
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.