• We have updated the site to the latest version. You will be required to log in to make sure your account is active. There are quite a few new functions so it will take a little time to get use to it. Please post if you see or have any issues.

1999 xc clutch

briankd

New Member
Messages
4
Age
53
Location
ohio
Country
USA
Years Snowmobiling
since 1992
Snowmobile
1999 xc 700
1996 trail
i just got my secondary clutch torn apart and cleaned and took some brake clean to my primary clutch and took pry bar and went to pry it open and was stuck . after a bit it free up seems ok now. seen online there is a product called WD-40 dry lube with pfte says won't attract dirt and such and good from 500 to - 50 degrees . any thought on this lubing primary or leave it dry ?
 
i just got my secondary clutch torn apart and cleaned and took some brake clean to my primary clutch and took pry bar and went to pry it open and was stuck . after a bit it free up seems ok now. seen online there is a product called WD-40 dry lube with pfte says won't attract dirt and such and good from 500 to - 50 degrees . any thought on this lubing primary or leave it dry ?

Graphite would be better.. I am sure you have belt dust stuck in the bushing and thats why it stuck.. needs to be cleaned.
 


Back
Top Bottom