Recent content by Neal@BMP

You may leave it mounted or not, totally a personal choice there. I leave mine mounted when I ride because I like to monitor Knock Retard (it'll show up on the Bully Dog gauge before your Polaris gauge flashes DET) in case I run into bad fuel along with monitoring my pipe EGT. The gauges are...

Just an FYI for Bikeman Performance customers, I developed a tune to help fog the motor with our Bully Dog tuner. The tune is free for anyone that purchased a Bully Dog through us. Send me an e-mail at neal@bikemanperformance.com with your ECU serial number and Bully Dog serial number attached...

I may be wrong but I don't think it was until the '13 or '14 model year that they offset their pistons.

Unfortunately right now the Bully Dog Docking Stations are out of stock due to a bean counter at BD thinking that they were the same as the EGT docking station for trucks and discontinuing them. They are working on getting them back into production but I don't have a solid ETA yet.

Thanks guys!

Thanks Brock! I know what it's like to be on the other side so I always try to make sure people are taken care of.

Ha, I'm glad you asked that because I went to take a picture of the two profiles side by side and they were the same! Our machinist ran the wrong profile in our latest batch. Luckily this batch was just finished so it was caught right away. Unluckily that means we're out of clutch weights until...

There is nothing wrong with that profile. We're working to streamline clutch weight production due to a new clutch weight design in the works (completely different from the Goldstars) and decided to stick with our old profile instead of the new one.

Yeah you guys scare a lot of people away from our clutch kits lol. On the plus side we are no longer sending that flatter profile with our Polaris clutch kits Div20

Those would be the 58-80g clutch weights which is not similar to the 10-series.

If you just ordered the clutch kit from our website you'll be getting our original profile which is similar to the 10-series Polaris weight which is not the profile that Brock and Dr.Notadoo dislike so much. You'll love the pipe and clutching, it definitely rips! No need for a fuel controller on...

Did you order the clutch kit straight through us? Sounds like you got a short track clutch setup instead of the long track setup which would explain the laziness in the trail. If you ordered it through us shoot me an e-mail at neal@bikemanperformance.com so I can get it sorted out.

Yeah those numbers seem a little on the low side.

When was the Stage 3 kit tested?

Agreeing with Joey on recommending the Bully Dog with BMP tune (bias aside) but I do know of some customers running their '16 sleds with a BMP pipe and no tune. We just do not recommend it as you are on the lean side and there is not much room for forgiveness in the factory tune and a pipe on...