Search results

hi, i'm new here and find some pretty ineresting information, One of them is to use heavy weight in the primary with light springs, i understand the benefit of it, (no loss energy against spring tension), but something is missing in my mind, if you load ramp weight, you will loose rpm, if you...

Does somebody tey the new SSI stainless pipe ?

thank you very much Brock to guide me in the right way :-) I try something this morning, not the ideal set up but best compromise with part i can find around. it was just a est to see what influance a few psi rating can have on the sled. So i try a 122/285 primary spring , with my 10-68...

I'm not too sure about yhe Team , Tied. I bought one las years to put on My AC F1100Turbo ( flash to 270 hp) too gain some back shift, and my originale AC modfied was way better than the team for back shift . Maybe on a 2 stroke its a different story *

Hi guys this is an up date with all the good information. sea level 0-400 ft max stock gearing 22-37, 2.52 9T drive sprocket standard set up as in the Manual is 10-66...

are you sure ? Heavier weight will makes the clutch to shift faster ? then If it shift faster, it will engage earlier ?? am i wrong ?

thank you very muchm very good info

is this receipe valid for my XCR, I'm at sea level 0-400 ft max mine is stock gearing 22-37, 2.52 9T drive sprocket standard set up is 10-66 100/275 primary spring 160/240 secondary spring helix: 58-44-36 top speed was very slow, very responsive, but no top speed, seems to spin free i put...

You said that max hp is at 8400 for 2017 ? in the owner manual it is wright: max rpm for 800 8250+0-200 ?? i ask to my dealer and after talking to Polaris , they said 8400 ?? error in the manual ,,, go figure what is the good information

Good Morning Brock, when you say 4200 rpm . is it with the stock 10-66 ? what will be the rpm drop with 10-68 also could you tell me what is the rule of thumb for spring rating, , exemple, 140/300 vs 165/300 for engagement rpm ?