Search results

Hey TJ, I'm by no means a "guru" like Doc and some others here. But here's what i did to a 600 i have and it really woke it up. Let track sag 3/8" when warmed up A 1.71 gear ratio is best Make sure all airbox joints are sealed good V force reeds help Clutching A 120/310 with 10-60 weights...

Excuse me, they're actually stock polaris weights 10-70's is what I meant

No, unfortunately it's for "spring" rate not weight of the rider. But, notice in the manual that polaris stock spring is rated for "up to 280 lb. rider" I think many will argue that if your over 230 lbs, you'll want the heavier spring. Also, it's been claimed that the low end of the spring rate...

check the RTS spring setting and clicker setting as well. make sure that these are set at factory starting pint for your weight and then go from there...

You're on the right track for sure and the factory are very good but take time to get them dialed in. Which W/E clickers do you have, the standard or with hi/lo? Make sure you start these at 3 from soft. You and i are the same weight and i like alittle more spring on the FTS, with the front...

Hey there, I have a PCV with mapping for the 15 from Dynotech that I bought for my 15 when I had it. I was very happy with the gains from it especially right in the middle. I even tried to get new mapping on for my 18 but there isn't any so I'd sell it to you for $200 shipped. I also have a...

Just curious if anyone has had any success and/or performance results using stock exhaust? I havent seen anything promoted with improved mapping etc for the 18' 800? I had great success with the PCV for my 15, thanks for any input!

I'd throw polaris 70 series weights at it. These sleds like the weight especially in the cold weather

The 1.61 is for sleds with the ripsaw2 track, if it has the cobra it most likely is geared 1.68 (22/37)

Try this; https://drive.google.com/open?id=1lp8tHdVSsYe1731SIXgNTPBElnZ93lWo

Yeah, once the pcv is installed, you'll stay on that mapping until you remove the pcv (which you wont want to).

You will be all set with their map.

Hey Bigfuse, I contacted them about putting a map on it for my 18' and they tell me there's no improving the stock map? I didnt see that coming...

What track are you running, Ripsaw2? I experienced the same problem until I installed the Storm 150!

PM'd you, I'd sell you mine..