Search results

so i did pull the injectors,that is quite a chore to say the least,called injector rx,he new just what i had and advised to leave harness atached,tested before and after cleaning with a flow chart printed out i was impressed from time i sent them untill got them back was only 10 days,no big deal...

oh my i almost forgot that problem found 2 relays on crossbrace in front power valve catching all the powder coming trhu the hood vents ,relocated them,1 over by the battery,2above the clutch area wraped up.anyway the whole problem was left side grip heater intermident short to ground on...

i will look them up,for cleaning,definitly headeing in the direction of fuel injectors,good thing i was sitting down when i looked up the price for new ones.thanks for the info, i didnt know if there was a option for cleaning thanks

just picked up this sled,with problem,would not start,got it from original owner, pretty much ran eathonal gas rarely treated,i drained all old gas instilled non eth about 3 gal.and about 12 oz. gas rx,changed fuel filter,inspected boots at throttle body,checked compressoin,at 120 psi,replaced...

ohmed out grip heater elements ,found left side shorted to handlebar,tiny bit of solder was protruding thru rubber insulation,replaced it.secured capacitors,inspected all 5 relays found 2 with green crap coming out from the inside,looks like a tiny vent hole,all connection terminals were clean...

2017 pro-s switchback so the grip and throttle heaters quit,and the high beam also quit,when i raise rpm off idle the head light flashes,checked for chaffing wiers,ok took apart switch all wires still connected,found 3 capacators un secured and bouncing around,large cap had no ohm reading but it...