2.52 driver swap

[jfaub63]

What drivers ( part#) are everyone using when they switch to the 2.52? Thanks

 

[proS800]

1590485

 

[jfaub63]

Holy sh##! $400.

 

[Dr.Notadoo]

1590485

Tom who makes those, are they stock?

 

[Jet800]

1590485

That is the Drive shaft assembly

 

[jfaub63]

I cant find just the drive cogs

 

[Dr.Notadoo]

Avid or Wahl brothers , drivers will be at least 100.00 each .

 

[Nortrider]

Why switch the drivers?

 

[Dr.Notadoo]

Well , for 1 you can't buy a low lug track unless you go to 2.52 pitch like a hacksaw. Or you cut down a track

 

[jfaub63]

To run a speed track or a 1" hacksaw and the 2.52 are more efficient

 

[Nortrider]

Cool I didn't know that.

 

[proS800]

Idk my buddY who swapped to the hacksaw said I only need that part to swap.

 

[Brock]

To run a speed track or a 1" hacksaw and the 2.52 are more efficient

Plus most 2.52 pitch tracks are 2 ply not the junk ballooning 1 ply.

 

[jfaub63]

Idk my buddY who swapped to the hacksaw said I only need that part to swap.

Yes that # was for the shaft and driver assembly

 

[fastsleddr]

I pressed the drivers from an IQ on mine. It does ratchet, and I haven't figured out why, yet.

 

[stroker2]

Can have this cool driver for a bundle of money.
http://www.indyspecialty.com/#!product-page/yucvr/191a4e7d-c278-89f9-5c98-9e0110c539d9

 

[Bigfuse]

Can have this cool driver for a bundle of money.
http://www.indyspecialty.com/#!product-page/yucvr/191a4e7d-c278-89f9-5c98-9e0110c539d9

Wow! For that price they better be made out of gold.

 

[fastsleddr]

Lot's of time, and work into those. Takes some good machinery too.

 

[trdehmer]

You can find used 1590485 drivers on EBay. Then you either need to hacksaw off or machine off the shaft so its flush with the bearing on the PTO side.