600 rush clutching...

[SledbuilderJD]

Hey guys I have searched a bit , but haven't found to many threads for rush/axys 600's
I am playing around with a tss-04 64-42-.36 140-220 in the back and a few different setups in the front 10-60 ,10-62 and some heal clickers and its geared to 1.9...
my son is about 150 lbs. motor has 2.5 degrees of timing ...
I am looking for ideas and opinions
... ( I know just buy him an 800...LOL)

 

[brian franc]

Hey guys I have searched a bit , but haven't found to many threads for rush/axys 600's
I am playing around with a tss-04 64-42-.36 140-220 in the back and a few different setups in the front 10-60 ,10-62 and some heal clickers and its geared to 1.9...
my son is about 150 lbs. motor has 2.5 degrees of timing ...
I am looking for ideas and opinions
... ( I know just buy him an 800...LOL)

Pulling 64 degrees out of the hole you have two choices....lighter weights, or more engagement. I prefer the 58-42-.36(stock rmk) with 160-260 spring, for much quicker backshift/downshift, up front 62g with a 150-310 spring, or 64g with 165-310 spring, 8250 rpm.

 

[SledbuilderJD]

thanks man ... i put a 58-42 .36 in with the 140-220...ended up with the teem lt green 150-340 and heal clickers 58.5 tip light all the weight in the heal and mid... once we get some real snow i will test ... made a few pulls in the grass seems ok, 8100 and creeping up.... we will see how it drives