• We have updated the site to the latest version. You will be required to log in to make sure your account is active. There are quite a few new functions so it will take a little time to get use to it. Please post if you see or have any issues.

Pro rmk 800 -14 Shortie?

A

Axelwim

New Member
Messages
1
Age
23
Location
Sweden
Country
Swedan
Years Snowmobiling
5
Snowmobile
Polaris pro rmk 800 -14
Hi, im wondering if anybody have shorted down their pro rmk 800 -14 from 155 to 146 or something shorter. Have been searching but can’t find any information about it. If you know any slides and track that fits and how to shorten the tunnel down to size please write. Thanks in forehand.
 
I haven't done one, but I've seen it done. They are also very prone to overheating after, unless you are in deep snow all day, meaning riding hardpack to get to powder could be a problem.
You really need someone that knows how to TIG weld aluminum to do it since you have to cut & modify the cross-over location for the tunnel heat exchanger in the older sleds. They redesigned the heat exchangers in the newer sleds to be much shorter & completely towards the front of the tunnel for the slash models.
You should be able to use parts from a SKS for the 146 rails & track.
At that point have you considered just getting a SKS? they have the 146 skid and a much shorter heat exchanger design versus the RMKs.
 
You must log in or register to reply here.


Back
Top Bottom