phurt54
New Member
- Messages
- 1
- Age
- 71
- Location
- Ransomville
- Country
- USA
- Years Snowmobiling
- 40
- Snowmobile
- Polaris Switchback
Do I need to take anything on the frame apart on a 2012 Switchback to be able to pull the cylinders off?
Rebuild Motor
- Thread starter phurt54
- Start date
OutCast
Active Member
If you havent got the cylinders off yet...
They will come off without removing the overstructure but getting them in you need to remove the overstructure. Remove the 4 bolts holding the 2 parts of the overstructure on, and theres 2 bolts at the bottm of the cross tube above the Exhaust facing to the left and right of the sled. Just roll it towards the front of the sled when all bolts are out.
Also theres 2 bolts holding the steering column on, remove those and turn the steering post so its outta your way.
They will come off without removing the overstructure but getting them in you need to remove the overstructure. Remove the 4 bolts holding the 2 parts of the overstructure on, and theres 2 bolts at the bottm of the cross tube above the Exhaust facing to the left and right of the sled. Just roll it towards the front of the sled when all bolts are out.
Also theres 2 bolts holding the steering column on, remove those and turn the steering post so its outta your way.