Transfer blocks

[mcAxysSB44]

Just so I don’t break or strip anything. How do I get the transfer blocks to turn? The owners manual doesn’t give adjustment instructions... it just says there is a tool needed that is ‘available at your dealer’.

 

[Just-Pinch-It]

Usually you can turn them with your fingers, when new they can be a little tighter then can use channel locks or crescent wrench.

 

[racerdave]

Or use the old double u shaped tool Polaris used to include with XTRA 10 and forward sleds

 

[mcAxysSB44]

Thanks guys!

 

[Doug]

Thanks guys!

If you have ice built up use a heat gun hair dryer to thaw them out. It takes a bit to turn them but you ussual can turn them. You can even use a wrench just a pain to get in.