140 200 not enough spring for me

[flasch192]

So I ran a 140 200 with the 50 44 sled ran really good but when I took my clutch off tonight too put the tied on you could see it was slipping, so if your a fat ass like me with studs id go stiffer, just my findings not bitching.

 

[Dr.Notadoo]

Flasch , what gear are you running and what spring are you going to? 155/222 or 140/220 thanks for the input

 

[flasch192]

I'm running 23 40
My helix finally showed for the tied so gonna run that all next week in the u.p.

If I was sticking with tss 04 I'd go 140 220 as it looks like it's slipping a tad in the mid too full shift of the clutch.

In the Tied I put in a 155 222 so we will see how it does .

 

[Dr.Notadoo]

Thx for the input, have s safe ride

 

[trdehmer]

140/220 works. I'm gonna try a 140/200 with three delrins. But I'm 165ish suited up...

 

[flasch192]

Yea , but I keep forgetting too use it , lol

 

[ttraynor]

Where you guys getting these Delron washers and are you placing them sheave side or helix side (outside)? Thanks!

 

[Dr.Notadoo]

I've never used them I would like to try

 

[proS800]

I'm a 155lbs rider with studs. I have the 140/200 spring in now with the derlin washer. Should I go to the 140/220 spring? I have that spring on hand

 

[flasch192]

I'm a 155lbs rider with studs. I have the 140/200 spring in now with the derlin washer. Should I go to the 140/220 spring? I have that spring on hand

I would run it for 100 miles or so , you deffinetly tell after that if it's working or not , my clutch had a black haze too it , so yea I was slipping the belt in the secondary, primary was spotless. ..

 

[flasch192]

Where you guys getting these Delron washers and are you placing them sheave side or helix side (outside)? Thanks!

I put 1 on each end of the spring , the tss04 needs them more so then the tied , any dealer should be able too get them, mine came from Parts Unlimited.

 

[proS800]

I would run it for 100 miles or so , you deffinetly tell after that if it's working or not , my clutch had a black haze too it , so yea I was slipping the belt in the secondary, primary was spotless. ..

 

[proS800]

What do you think about that?

 

[flasch192]

I'd switch it out and go a little stiffer , make sure you clean the sheaves 2 !