Search results

Hey Guys, Can someone kindly provide me the torque specs for the P85 Spider and Spider jam nut please? Is it 200 ft/lbs and 235 ft/lbs respectively? Also, what's recommended for the type of loctite to use? Maybe a 620 or 640, but unsure what the service manual states. Thanks in advance....

Trying to figure this out. Seems no matter how much I adjust the belt deflection (tight/loose), the track and secondary still spin ridiculously fast at idle with rear end suspended in air on Assault 144 w/1.352" Cobra. Track has 1/2" of freehang, clutches properly aligned, chaincase is good and...

So, I'm well aware of the great all around advantages of the 50-44 versus the stock helix. However, is there really a performance difference jumping to a 52-46 from the 50-44? Pros/Cons?? I only ask because my helix is a dual angle with these two angles listed.

Guys, Just want to confirm when installing a dual ramp helix onto the roller plate, I want to use the ramp to the right or clockwise of the stamped number (50-44 F ER) on the face of the helix correct? I have two ramps on my helix, a 52-46 and the 50-44 and the ramps are not directly under the...

Can I perform this test to check that the belt goes to the top of the primary with sled on a lift or does motor need to be loaded?

I updated the gearing to 24/40 w/70P chain. This gave a 1/4" slack. I also exchanged out the stock plastic tensioner with the IQr roller tensioner. Rode the sled yesterday and noticed upon deceleration, before I even applied the brake, a whining noise coming the chaincase. Although not terribly...