• We have updated the site to the latest version. You will be required to log in to make sure your account is active. There are quite a few new functions so it will take a little time to get use to it. Please post if you see or have any issues.

Search results

  1. trdehmer

    team vs p2

    I have a P2 in excellent shape for sale with two helixes, and three springs (one new). It has low miles on it. Sold the sled it was on.
  2. trdehmer

    Anyone running 9T 2.86P drivers on the Indy or Matryx Chassis?

    If so, what track are you running and are you running any studs - especially on the outside?
  3. trdehmer

    Adjustable weights who's using them and what brand

    I tried the GBoost the other weekend for the first time, brought my RPM's way down - like 500ish. What does that tell me? OEM belt slips - like after around 300ish miles. I plan to trial some clutching using the GBoost to see how that turns out. I did notice that even with belt deflection...
  4. trdehmer

    Adjustable weights who's using them and what brand

    I'm a bit surprised that 160/240 white secondary spring isn't killing your MPH. Generally anything over a 222 finish rate in the secondary and it slows you down from what I've seen/tested.
  5. trdehmer

    Fuel Gauge Inaccurate Readings?

    I'm assuming his 7s display flashed a "low fuel pressure" warning of some sort for him to know there was an issue?
  6. trdehmer

    Snow Check 2022 ... hmmmmmmm

    I'm hoping for a Switchback Pro-S Matryx! With a factory turbo :-)
  7. trdehmer

    850 CLUTCHING

  8. trdehmer

    avid 9 teeth 2,86 pitch

    So you put in 10T 2.52P drivers or the 9T 2.86P drivers? If it's super tight with the drivers in and stock rear idlers you might not be able to fit in bigger wheels even if you cut the rails, the reason is you'll likely run out of adjustment room - either way, to go larger rear idlers you'll...
  9. trdehmer

    avid 9 teeth 2,86 pitch

    You might need to do it in phases, but step one which should provide the biggest benefit is getting 9T 2.86P drivers. You can get those from Avid or Velocity Sled Performance. My recommendation if at all possible, is get them lightened up first (I think Velocity Sled Performance might sell...
  10. trdehmer

    TJ's 2020 - 20201 Seasonal log thread / modification thread

    I'd say you got a good one!
  11. trdehmer

    avid 9 teeth 2,86 pitch

    Drew13, what sled do you have your trying to do this to? I have larger drivers and idlers on my 2016 Pro-S Switchback (9T 2.52P drivers and 136" track) and 2021 VR1 Matryx (9T 2.86P drivers and 137" track).
  12. trdehmer

    850 CLUTCHING

    How did you set up your P2 for clutch alignment on the 850? I think I have one washer behind my OEM secondary that is around 0.100" thick.
  13. trdehmer

    team vs p2

    The part number you want for the 145-220 is 7043496. You can still find places that have it in stock....
  14. trdehmer

    Decision on Gear Ratio - Track Swap

    So is this the gear chart to use for an XCR with 2.52 Pitch track - what size drivers?
  15. trdehmer

    Best clutch kit??

    I’m trying to figure that out with him, only want to start with three about 1g heavier than the standard Dalton 1” slug. So something around 5.15g I’m thinking???
  16. trdehmer

    Best clutch kit??

    Try the guy on eBay, that’s probably what I’ll do.
  17. trdehmer

    Best clutch kit??

    BigFuse - you ever tried the Dalton Tungsten Super Slugs in the tips of the Turbo Mags (vs. welding on tip weight)? Dalton doesn't sell them anymore, but there is a guy making something similar on eBay...
  18. trdehmer

    gates vs polaris belt

    Shorter might also climb further up the primary and further down into the secondary, so might be faster - no??
  19. trdehmer

    gates vs polaris belt

    Lets assume a person has two identical belts, but the pitch length on one is either shorter or longer than the other? What in theory would be faster - the shorter pitch length or longer pitch length?
  20. trdehmer

    Jaws pipe w/heat shield, race can and North star clutch kit

    Bigfuse - was your primary worked over at all to use shims on each side of the primary spring? I need to try again with my 110/320 primary spring with the TM's, but the 110/290 might be a good option for me to try as well - and I have one.


Back
Top Bottom